This section describes how to configure Defense4All protected objects (POs).
To set up Defense4All protected objects (POs):
- From an Internet browser, enter the IP address for the host that is running Defense4All.
- From the Defense4All Setup pane, select Defense4All > Setup.
- To the right of the Protected Objects (POs) label, click Add.
- In the Add Protected Object (PO) pane, set the following parameters:
Parameter | Description |
---|---|
Name | Name of the PO. Valid characters: A–Z, a–z, 0-9, _ NOTE: A PO cannot be removed when under attack. |
IP Address | IP address and net mask of the PO. |
- Click Submit.